How To Connect Active Campaign To Divi

You can also see whether the completion rate has increased or reduced, for how long it considers contacts to reach that objective, and you can browse all contacts to see who did and didn’t reach the objective. ActiveCampaign’s Message Variables is my preferred feature. It conserves me a load of effort and time, and neither MailChimp nor ConvertKit (update: 9/2020 ConvertKit now has ” bits”) has a similar feature.

Let’s say you have the first name of only a few of your contacts, which holds true with my list. I usually don’t need a given name to register to my list, but often I get a given name, such as when somebody buys an item. Wouldn’t it be nice to welcome your contacts by name, in the events when you have it? You can do this, but it’s troublesome.

I’m also filtering for generic terms added by other systems, such as a dash, or “Guest.” If they have a very first name, I state “Hey,” and after that their given name. If they don’t, I just say “Hey there,” (). By constructing a Message Variable in ActiveCampaign, I can easily alter my welcoming according to whether I have the contact’s given name.

I produced a variable that’s merely %greeting-hey%. If I have the contact’s name, it appears in the e-mail. If I do not have the contact’s name, it defaults to “Hey,”. Where Message Variables actually conserve me a great deal of time is by allowing me use the same automation over and over again for my webinars, and I can quickly change out all of the information.

Here are variables for a webinar I run called “Bust Through Creative Blocks.” You can see I have a lot of various variables here, such as the date and time of the webinar, the price of the item, deal terms, discount coupon code, and more. Each time I run a new webinar, I can change each of these variables to match any schedule changes or offer changes.

And here it remains in an e-mail. This message variable allows me to quickly change out a countdown timer. I did point out earlier that one of the cons of ActiveCampaign is their e-mail modifying experience. I changed from MailChimp, and MailChimp takes place to have the very best e-mail editing experience. I truly like to send simple emails.

I have actually found that extremely difficult to do with ActiveCampaign. For some time, I was modifying e-mails in ActiveCampaign’s hybrid editor, which is rather cumbersome. For a very long time, I utilized ActiveCampaign’s hybrid HTML and WYSIWYG editor, which was activated by a basic template I produced. The interface for the HTML editor looks like it was pulled from some free open-source job. .

Nevertheless, including images is a bit of a task. You have to select them from a file web browser. There’s no drag and drop choice. ActiveCampaign’s HTML email editor needs that you compose entirely in HTML. The option to this, if you want to have control over the HTML, is to edit pure HTML, with a sneak peek on the side.

Including images to ActiveCampaign’s abundant text editor is a cumbersome experience. You need different text boxes for above and listed below the image. Recently I have begun using ActiveCampaign’s rich text editor. They have some great templates, but I still desire to send out the plainest email possible. They do have some plain-looking e-mails, however they have some degree of minimal formatting, which you can’t eliminate – .

But, with some adjustments, I can make my email quite standard. I can make it immediately take up the whole window, and I can modify the typography to be slightly bigger, and have a little bit more prominent. The most frustrating part of ActiveCampaign’s abundant text editor is including images. Envision you’ve just typed out a great email. .

You can’t merely include an image to a block of text. Rather, you need to create 2 blocks of text: one for before the image, and one for after the image. If you’ve made any formatting changes, you’ll need to watch on those to remain constant. That’s something to handle when you want to add one image, however when you wish to include a number of, it ends up being a big task.

They even have a basic mage editor where you can crop the image – . MailChimp’s editor is the finest I’ve seen in all of the e-mail marketing platforms I have actually tried. You have access to the underlying code, so you can develop a genuinely plain e-mail, supplied you make a fundamental design template initially.

MailChimp’s built-in image editor is very powerful. You can resize, crop, and add custom text to your images. I miss out on MailChimp’s email-editing experience (). It would conserve me a little time to have that exact same experience on ActiveCampaign. However the highly-customizable automations I can develop on ActiveCampaign more than make up for that potential time savings.

ConvertKit’s e-mail editing experience is very plain, but easy to browse. Their templates are restricted, which is great with me, but their e-mail modifying experience is somewhat simpler in that you can develop inline images, and you can develop a completely plain email, and even modify the underlying HTML. If you desire to make some quick edits to some e-mails in an automation, with ActiveCampaign, it’s cumbersome.

I’ll click on an email, and it takes me to the editor for that e-mail. Note that I can’t even Command + Click to open it in another tab. Whether they indicated to or not, ActiveCampaign has handicapped Command + Click from the automation editor. If I wished to change back and forth between numerous emails, I would intuitively be inclined open the very same automation in different tabs, then open the respective e-mails from each of those tabs.

In the Automations area, there’s a “Handle Messages” area. From here, you can see all of the messages in each of your automations. You can modify each one, or you can Command + Click to open each in a new tab to more easily edit your entire series. . Contrast that with ConvertKit’s Series.

Again, it would conserve me a lot of time to have ConvertKit’s automation email modifying experience on ActiveCampaign – . However picking an email marketing platform is like picking a spouse. ActiveCampaign makes up for it with their Message Variables, more robust automations, and advanced segmentation. Speaking of division, another reason I changed from MailChimp to ActiveCampaign was that MailChimp has limited division alternatives.

You can combine qualities with an AND/OR operator, and you can mix and match those groups of qualities with another AND/OR operator. With MailChimp, you can only segment by AND/OR, however MailChimp’s Pro plan permits more sophisticated segmenting, for an extra $199 a month. In my search for the perfect email marketing platform, I saw lots of others, a few of which I’ve currently mentioned.

ConvertKit. If I weren’t on ActiveCampaign, I would probably be using ConvertKit. Their automations are much easier to construct, though they aren’t as flexible as ActiveCampaign’s, and their segmentations choices aren’t as advanced either. They likewise do not have goal tracking, or Message Variables. MailChimp. You already understand that I switched from MailChimp to ActiveCampaign.

How To Connect Active Campaign To Divi

You can likewise see whether the completion rate has actually increased or decreased, how long it considers contacts to reach that objective, and you can browse all contacts to see who did and didn’t reach the objective. ActiveCampaign’s Message Variables is my preferred feature. It saves me a lot of effort and time, and neither MailChimp nor ConvertKit (update: 9/2020 ConvertKit now has ” snippets”) has an equivalent feature.

Let’s state you have the very first name of just some of your contacts, which is the case with my list. I normally don’t require a given name to sign up to my list, however sometimes I get a given name, such as when somebody purchases an item. Wouldn’t it be good to greet your contacts by name, in the events when you have it? You can do this, however it’s cumbersome.

I’m likewise filtering for generic terms added by other systems, such as a dash, or “Guest.” If they have a given name, I state “Hey,” and then their given name. If they do not, I simply say “Hey there,” (). By constructing a Message Variable in ActiveCampaign, I can easily change my greeting according to whether I have the contact’s very first name.

I developed a variable that’s simply %greeting-hey%. If I have the contact’s name, it reveals up in the email. If I don’t have the contact’s name, it defaults to “Hey,”. Where Message Variables really conserve me a great deal of time is by enabling me utilize the exact same automation over and over again for my webinars, and I can quickly change out all of the information.

Here are variables for a webinar I run called “Bust Through Creative Blocks.” You can see I have a bunch of various variables here, such as the date and time of the webinar, the cost of the item, offer terms, coupon code, and more. Each time I run a brand-new webinar, I can change each of these variables to match any schedule changes or offer changes.

And here it is in an e-mail. This message variable enables me to easily change out a countdown timer. I did point out earlier that a person of the cons of ActiveCampaign is their email modifying experience. I switched from MailChimp, and MailChimp takes place to have the finest email modifying experience. I truly like to send out basic emails.

I have actually discovered that really difficult to do with ActiveCampaign. For awhile, I was editing emails in ActiveCampaign’s hybrid editor, which is rather cumbersome. For a very long time, I utilized ActiveCampaign’s hybrid HTML and WYSIWYG editor, which was activated by a standard template I created. The interface for the HTML editor appears like it was pulled from some totally free open-source task. .

However, including images is a little bit of a task. You need to choose them from a file browser. There’s no drag and drop choice. ActiveCampaign’s HTML e-mail editor needs that you compose completely in HTML. The option to this, if you want to have control over the HTML, is to edit pure HTML, with a preview on the side.

Including images to ActiveCampaign’s rich full-screen editor is a cumbersome experience. You need separate text boxes for above and listed below the image. Recently I have actually begun utilizing ActiveCampaign’s abundant full-screen editor. They have some good design templates, however I still want to send out the simplest email possible. They do have some plain-looking emails, however they have some degree of minimal format, which you can’t remove – .

But, with some adjustments, I can make my e-mail quite standard. I can make it immediately take up the whole window, and I can fine-tune the typography to be slightly larger, and have a bit more prominent. The most aggravating part of ActiveCampaign’s abundant full-screen editor is including images. Imagine you’ve just typed out a fantastic e-mail. .

You can’t just include an image to a block of text. Instead, you need to create two blocks of text: one for before the image, and one for after the image. If you have actually made any formatting changes, you’ll need to watch on those to stay consistent. That’s something to deal with when you wish to add one image, however when you desire to add a number of, it ends up being a huge task.

They even have a fundamental mage editor where you can crop the image – . MailChimp’s editor is the very best I’ve seen in all of the email marketing platforms I have actually attempted. You have access to the underlying code, so you can create a truly plain e-mail, supplied you make a standard design template first.

MailChimp’s integrated image editor is incredibly effective. You can resize, crop, and add customized text to your images. I miss out on MailChimp’s email-editing experience (). It would conserve me a little time to have that exact same experience on ActiveCampaign. However the highly-customizable automations I can develop on ActiveCampaign more than offset that possible time cost savings.

ConvertKit’s e-mail modifying experience is very plain, however easy to navigate. Their templates are limited, which is fine with me, however their e-mail modifying experience is a little much easier in that you can produce inline images, and you can create a totally plain e-mail, and even edit the underlying HTML. If you want to make some quick edits to some emails in an automation, with ActiveCampaign, it’s troublesome.

I’ll click on an e-mail, and it takes me to the editor for that e-mail. Note that I can’t even Command + Click to open it in another tab. Whether they indicated to or not, ActiveCampaign has handicapped Command + Click from the automation editor. If I wanted to switch back and forth between various e-mails, I would intuitively be inclined open the exact same automation in different tabs, then open the particular e-mails from each of those tabs.

In the Automations area, there’s a “Manage Messages” area. From here, you can see all of the messages in each of your automations. You can modify each one, or you can Command + Click to open each in a new tab to more easily edit your whole series. . Contrast that with ConvertKit’s Sequences.

Once again, it would conserve me a lot of time to have ConvertKit’s automation email editing experience on ActiveCampaign – . However picking an email marketing platform is like picking a spouse. ActiveCampaign makes up for it with their Message Variables, more robust automations, and advanced division. Mentioning segmentation, another reason I changed from MailChimp to ActiveCampaign was that MailChimp has actually limited segmentation alternatives.

You can integrate attributes with an AND/OR operator, and you can blend and match those groups of traits with another AND/OR operator. With MailChimp, you can only sector by AND/OR, nevertheless MailChimp’s Pro plan permits more sophisticated segmenting, for an additional $199 a month. In my look for the ideal e-mail marketing platform, I saw numerous others, a few of which I have actually currently mentioned.

ConvertKit. If I weren’t on ActiveCampaign, I would most likely be utilizing ConvertKit. Their automations are a lot easier to build, though they aren’t as flexible as ActiveCampaign’s, and their segmentations alternatives aren’t as advanced either. They likewise do not have goal tracking, or Message Variables. MailChimp. You currently understand that I switched from MailChimp to ActiveCampaign.