How To Connect Gravity Forms To Active Campaign

You can also see whether the completion rate has actually increased or decreased, for how long it considers contacts to reach that objective, and you can search all contacts to see who did and didn’t reach the objective. ActiveCampaign’s Message Variables is my preferred feature. It conserves me a ton of effort and time, and neither MailChimp nor ConvertKit (upgrade: 9/2020 ConvertKit now has ” snippets”) has a similar feature.

Let’s state you have the given name of only some of your contacts, which holds true with my list. I normally don’t need a first name to register to my list, but often I get a given name, such as when somebody buys an item. Would not it be great to welcome your contacts by name, in the events when you have it? You can do this, however it’s cumbersome.

I’m likewise filtering for generic terms added by other systems, such as a dash, or “Visitor.” If they have a given name, I state “Hey,” and then their given name. If they don’t, I simply state “Hey there,” (). By constructing a Message Variable in ActiveCampaign, I can easily alter my greeting according to whether or not I have the contact’s given name.

I produced a variable that’s simply %greeting-hey%. If I have the contact’s name, it appears in the e-mail. If I do not have the contact’s name, it defaults to “Hey,”. Where Message Variables truly conserve me a lot of time is by allowing me use the very same automation over and over once again for my webinars, and I can rapidly change out all of the details.

Here vary for a webinar I run called “Bust Through Creative Blocks.” You can see I have a lot of various variables here, such as the date and time of the webinar, the rate of the item, offer terms, voucher code, and more. Each time I run a new webinar, I can alter each of these variables to match any schedule changes or offer modifications.

And here it remains in an email. This message variable enables me to easily change out a countdown timer. I did mention earlier that a person of the cons of ActiveCampaign is their e-mail modifying experience. I switched from MailChimp, and MailChimp happens to have the very best e-mail modifying experience. I actually like to send easy emails.

I’ve discovered that really hard to do with ActiveCampaign. For awhile, I was editing e-mails in ActiveCampaign’s hybrid editor, which is quite clunky. For a very long time, I used ActiveCampaign’s hybrid HTML and WYSIWYG editor, which was set off by a fundamental design template I produced. The interface for the HTML editor looks like it was pulled from some complimentary open-source job. .

However, including images is a little a chore. You have to choose them from a file browser. There’s no drag and drop option. ActiveCampaign’s HTML e-mail editor needs that you compose completely in HTML. The alternative to this, if you wish to have control over the HTML, is to modify pure HTML, with a preview on the side.

Including images to ActiveCampaign’s rich text editor is a cumbersome experience. You need different text boxes for above and listed below the image. Recently I have begun using ActiveCampaign’s rich text editor. They have some nice templates, but I still want to send out the simplest e-mail possible. They do have some plain-looking emails, however they have some degree of very little formatting, which you can’t remove – .

However, with some modifications, I can make my email quite fundamental. I can make it automatically use up the entire window, and I can modify the typography to be slightly bigger, and have a little more prominent. The most discouraging part of ActiveCampaign’s abundant full-screen editor is including images. Picture you’ve simply typed out an excellent e-mail. .

You can’t simply add an image to a block of text. Rather, you have to create 2 blocks of text: one for prior to the image, and one for after the image. If you’ve made any format changes, you’ll need to watch on those to stay consistent. That’s one thing to handle when you wish to include one image, however when you wish to include numerous, it ends up being a huge chore.

They even have a basic mage editor where you can crop the image – . MailChimp’s editor is the finest I’ve seen in all of the email marketing platforms I’ve tried. You have access to the underlying code, so you can develop a genuinely plain e-mail, supplied you make a fundamental design template first.

MailChimp’s integrated image editor is incredibly powerful. You can resize, crop, and include custom text to your images. I miss MailChimp’s email-editing experience (). It would conserve me a little time to have that very same experience on ActiveCampaign. But the highly-customizable automations I can construct on ActiveCampaign more than offset that prospective time cost savings.

ConvertKit’s email editing experience is extremely plain, however easy to browse. Their templates are limited, which is great with me, however their email modifying experience is a little easier because you can create inline images, and you can develop a totally plain e-mail, and even modify the underlying HTML. If you desire to make some quick edits to some emails in an automation, with ActiveCampaign, it’s troublesome.

I’ll click on an e-mail, and it takes me to the editor for that email. Keep in mind that I can’t even Command + Click to open it in another tab. Whether they suggested to or not, ActiveCampaign has disabled Command + Click from the automation editor. If I wished to switch back and forth in between different e-mails, I would intuitively be inclined open the very same automation in various tabs, then open the respective emails from each of those tabs.

In the Automations section, there’s a “Handle Messages” location. From here, you can see all of the messages in each of your automations. You can modify every one, or you can Command + Click to open each in a new tab to more easily edit your whole series. . Contrast that with ConvertKit’s Sequences.

Once again, it would save me a lot of time to have ConvertKit’s automation e-mail editing experience on ActiveCampaign – . But picking an e-mail marketing platform resembles picking a partner. ActiveCampaign offsets it with their Message Variables, more robust automations, and advanced segmentation. Mentioning segmentation, another factor I switched from MailChimp to ActiveCampaign was that MailChimp has actually limited segmentation choices.

You can integrate qualities with an AND/OR operator, and you can blend and match those groups of characteristics with another AND/OR operator. With MailChimp, you can just segment by AND/OR, nevertheless MailChimp’s Pro plan allows more sophisticated segmenting, for an extra $199 a month. In my search for the best email marketing platform, I saw lots of others, a few of which I’ve currently discussed.

ConvertKit. If I weren’t on ActiveCampaign, I would most likely be using ConvertKit. Their automations are much simpler to build, though they aren’t as versatile as ActiveCampaign’s, and their segmentations alternatives aren’t as sophisticated either. They likewise do not have goal tracking, or Message Variables. MailChimp. You currently know that I switched from MailChimp to ActiveCampaign.

How To Connect Gravity Forms To Active Campaign

You can likewise see whether the conclusion rate has increased or decreased, for how long it takes for contacts to reach that goal, and you can search all contacts to see who did and didn’t reach the goal. ActiveCampaign’s Message Variables is my favorite function. It conserves me a lot of time and effort, and neither MailChimp nor ConvertKit (update: 9/2020 ConvertKit now has ” snippets”) has an equivalent feature.

Let’s say you have the very first name of just a few of your contacts, which is the case with my list. I generally do not need a given name to register to my list, however sometimes I get a very first name, such as when somebody buys an item. Wouldn’t it be nice to welcome your contacts by name, in the cases when you have it? You can do this, but it’s troublesome.

I’m likewise filtering for generic terms added by other systems, such as a dash, or “Visitor.” If they have a given name, I state “Hey,” and then their first name. If they do not, I simply state “Hey there,” (). By building a Message Variable in ActiveCampaign, I can quickly change my greeting according to whether or not I have the contact’s very first name.

I developed a variable that’s simply %greeting-hey%. If I have the contact’s name, it appears in the email. If I do not have the contact’s name, it defaults to “Hey,”. Where Message Variables truly conserve me a great deal of time is by enabling me use the same automation over and over again for my webinars, and I can rapidly alter out all of the information.

Here are variables for a webinar I run called “Bust Through Creative Blocks.” You can see I have a lot of various variables here, such as the date and time of the webinar, the cost of the product, offer terms, coupon code, and more. Each time I run a brand-new webinar, I can alter each of these variables to match any schedule modifications or deal modifications.

And here it is in an email. This message variable allows me to quickly alter out a countdown timer. I did discuss earlier that one of the cons of ActiveCampaign is their e-mail modifying experience. I switched from MailChimp, and MailChimp occurs to have the best email editing experience. I truly like to send out simple emails.

I have actually found that very tough to do with ActiveCampaign. For awhile, I was modifying e-mails in ActiveCampaign’s hybrid editor, which is quite clunky. For a very long time, I used ActiveCampaign’s hybrid HTML and WYSIWYG editor, which was activated by a fundamental design template I produced. The user interface for the HTML editor appears like it was pulled from some free open-source job. .

Nevertheless, adding images is a little a chore. You have to pick them from a file internet browser. There’s no drag and drop alternative. ActiveCampaign’s HTML e-mail editor requires that you compose totally in HTML. The option to this, if you wish to have control over the HTML, is to edit pure HTML, with a preview on the side.

Adding images to ActiveCampaign’s rich full-screen editor is a cumbersome experience. You require separate text boxes for above and below the image. Lately I have begun utilizing ActiveCampaign’s rich full-screen editor. They have some good design templates, however I still desire to send the plainest email possible. They do have some plain-looking e-mails, however they have some degree of very little format, which you can’t remove – .

But, with some adjustments, I can make my email pretty basic. I can make it instantly take up the entire window, and I can tweak the typography to be somewhat bigger, and have a bit more leading. The most frustrating part of ActiveCampaign’s abundant text editor is including images. Imagine you’ve simply typed out a fantastic email. .

You can’t merely include an image to a block of text. Rather, you need to develop two blocks of text: one for prior to the image, and one for after the image. If you’ve made any formatting modifications, you’ll have to watch on those to remain consistent. That’s something to handle when you wish to include one image, however when you wish to include several, it becomes a big chore.

They even have a fundamental mage editor where you can crop the image – . MailChimp’s editor is the best I have actually seen in all of the email marketing platforms I’ve tried. You have access to the underlying code, so you can produce a truly plain email, provided you make a basic template first.

MailChimp’s integrated image editor is incredibly powerful. You can resize, crop, and include custom-made text to your images. I miss MailChimp’s email-editing experience (). It would save me a little time to have that very same experience on ActiveCampaign. But the highly-customizable automations I can construct on ActiveCampaign more than offset that possible time cost savings.

ConvertKit’s email modifying experience is really plain, however easy to navigate. Their templates are limited, which is fine with me, but their e-mail editing experience is somewhat simpler in that you can produce inline images, and you can create an absolutely plain email, and even edit the underlying HTML. If you wish to make some quick edits to some e-mails in an automation, with ActiveCampaign, it’s cumbersome.

I’ll click on an e-mail, and it takes me to the editor for that email. Keep in mind that I can’t even Command + Click to open it in another tab. Whether they indicated to or not, ActiveCampaign has handicapped Command + Click from the automation editor. If I wanted to switch back and forth between various emails, I would intuitively be inclined open the exact same automation in various tabs, then open the particular emails from each of those tabs.

In the Automations area, there’s a “Manage Messages” area. From here, you can see all of the messages in each of your automations. You can edit every one, or you can Command + Click to open each in a brand-new tab to more quickly modify your whole series. . Contrast that with ConvertKit’s Series.

Again, it would conserve me a great deal of time to have ConvertKit’s automation e-mail editing experience on ActiveCampaign – . But choosing an e-mail marketing platform is like selecting a partner. ActiveCampaign offsets it with their Message Variables, more robust automations, and advanced division. Speaking of segmentation, another reason I switched from MailChimp to ActiveCampaign was that MailChimp has limited division options.

You can combine qualities with an AND/OR operator, and you can blend and match those groups of characteristics with another AND/OR operator. With MailChimp, you can just segment by AND/OR, however MailChimp’s Pro strategy permits more sophisticated segmenting, for an extra $199 a month. In my look for the ideal e-mail marketing platform, I saw lots of others, some of which I’ve already mentioned.

ConvertKit. If I weren’t on ActiveCampaign, I would most likely be utilizing ConvertKit. Their automations are a lot easier to develop, though they aren’t as flexible as ActiveCampaign’s, and their segmentations choices aren’t as advanced either. They likewise do not have objective tracking, or Message Variables. MailChimp. You already know that I switched from MailChimp to ActiveCampaign.